Capture Plotter Client

Orientation software locks up and stereoplotter communication is lost.
The analytical stereoplotter client should be exited before orientation software is run if the orientation package is on the same PC as Capture. This is because the same serial connection is used to communicate to both the plotter client and the orientation software, and only one may access the port at a time. Unpredictable results/and or crashes may occur. Simply click the X in the upper right corner of the plotter client window or exit the orientation software. To start the plotter client alone, use the Start->Programs->Datem Software method. Orientation software may be restarted by clicking on the appropriate icon, or through Start->Programs.

Real-time coordinates may fail to display in some analytical plotter clients.
Capture versions older than 1.6. If the plotter client registers all zeroes, and there is a valid orientation existing, delete the AP32SET.CFG file in the ...\Program Files\Datem Software folder and restart the application. A new copy of this file will be generated as needed. Later versions of Capture plotter clients do not use this file.

Mt. McKinley @ 14,000 Feet